5S SPRING DALE T i ASSEMBLY INSTRUCTIONS important Safety Instructions «Power at the Fuse Hox should be disconnected before installing this indenture, . The Fixture ground wire { bare of green installed wire is NOT connected to current carrying supply wires J. The insulation an any of the wires must not be damaged during installation. No rough or sharp edges are in contact with any of the wires. . Fixture wires are connected to the proper house supply wires.
5 SPRING DALE" STH11019 WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. 9) Place shade onto the socket and secure with screw. Socket Repeat for ether 2 shades and sockets, 10) Ibsen puts into sockets. FT PACKAGING TO MINIMIZE DAMAGE.
E PRINGARLE" INSTRUCCIONES DE ASAMBLEA Instrucciones de seguridad importantes . Se debe desconectar fa alimentación en Ja caja de fusibles antes de instalar esta lm para. + El conductor de yerra de fa lámparas (desnudo o verde} instalado. NG debe estar conectado a conductores de suministra que leven corriente. ¢ Ninguno de fos cables debe sufre dado an of aislamiento durante Ja instalación. Listes . No deba haber bordos rugosos o filosos en contacto con alguno de fos cables. .