Instructions / Assembly

Remove the white c-clips located on the net rod sockets. Carefully li the bottom end of the black net

rods out of the net rod sockets and lower the net.

Select two adjoining net rods. These will be the “mounting rods” where you will locate your hoop on the

trampoline. We suggest opposite the entryway on round trampolines and on any of the curved frame

sections on oval or square models. These “mounting rods” will support the hoop.

NOTE - Check that the plastic sleeves covering the net rods are intact and free from cracks or

damage. If they are damaged, contact Springfree Trampoline to order replacements BEFORE

installing the FlexrHoop.

WARNING - When choosing the location of the hoop on your trampoline, take into consideration

ball over-throws and safe and easy retrieval.