Instructions / Assembly

6
NOTE - Take care to align the plastic clamps so that they are facing the same direction. The nut will
only fit one side of the plastic clamp and when fully assembled, should face the center of the
trampoline with the bolt head facing outward.
NOTE - As you fasten the bolts through the stabilising brackets and plastic clamps, take care not to
snag the net with the Allen key. Handle the net with care and be sure that it does not get caught or
it may tear.
Focusing on the 2 “mounting rods,” take the plastic clamps and clip them to the net rods as shown.
Starting on one side, align the top hole of the stabilising bracket with the top plastic clamp and fasten
with a bolt. Repeat for the bottom hole and clamp.