Use and Care Manual

D. SELECTION OF FUNCTIONS

1. ON/OFF: Turns unit ON or OFF

• Press once to turn ON. Following indicator lights will illuminate: POWER,

IONIZER, and SPEED. Unit operates in default High fan speed. LCD

panel will display rotating fan at High speed.

• Press again to turn OFF.

• IONIZER turns on automatically when unit is powered on.

2. FLOW: Horizontal swing of vertical louvers.

• Press once to engage auto swing of louvers. FLOW indicator light will

illuminate and LCD panel will display auto swing indicator.

• Press again for fixed air direction.

• To directing vertical airflow, adjust the horizontal louvers manually.

3. Speed: Selects fan speed.

• Press to select desired fan speed: High – Medium – Low, in turn. LCD

panel will display the corresponding air speed.

4. Sleep: Unit operates according to preset computer program, alternating

between different fan speeds.

• Press to engage in Sleep Mode. SLEEP indicator will illuminate and LCD

panel displays the sleep (moon) indicator.

• To return to regular fan mode, press either SLEEP or SPEED button.

5. Cool: For cool air / humidify function.

• Press once to start the evaporative cooling function. COOL indicator light

will illuminate and LCD panel displays the cool (snowflake) indicator.

• Press again to stop function and operate in regular fan mode.

• Make sure water is added before turning on this function. Unit cycles the

water to blow cool, humidified air.

• Add ice to the water tank for added cooling.

6. Timer: Sets timer-off in increment of 0.5 hours.

• Timer can be set between 0.5 to 7.5 hours.

• TIMER indicator will illuminate and LCD panel will display the set time.

• To remove timer and operate unit continuously, press button repeatedly

until indicator light and display goes off.

7. Oxygen Bar with Negative ion.

• Fan releases negative ions into the air.

• Operates automatically when unit is turned on.

NOTE: Water must be added to the water tank before using the COOL function.