Manual

26 27
teleVisiOn
To project photos and videos on a TV screen, turn OFF your
camera and select "View". Use the video cable (supplied) and
plug in TV/OUT port of the camera to "Video IN" of TV set.
Turn ON the camera. Viewing screen menu will also appear on
TV screen. You will see the latest picture taken by your system.
To change pictures use "UP" or "DOWN" keys. When you push
"MENU", you will see these option:
View Date/Time: Increases size of date and time
imprinted on the picture
Erase one: Erases the photo or the video on the screen
Erase All: Erases all stored photos and videos,
exclusive of protected photos and videos.
Format: Formats memory card and erases all
protected photos and videos.
Protect: Protects the photo or video on the screen.
Language: Selects language.
Exit: Returns to viewing screen.
English
MULTI-SHOT
Allows for a 20 second interval between 4
consecutive photos. This option shows a different
view of all 4 photos.
VIDEO-LENGTH
Selects the video length when the camera is set in video mode
DISTANCE
The distance dial sets the motion detector
sensitivity. Use this feature to set the
detection range required. Turn dial to the
right to increase distance. Range of detector
is between 5 and 50 ft. The best method
to determine a proper distance is to turn
"MODE" switch to "Test" and to walk perpendicularly to the
front of the camera where action is anticipated. When the
detector is activated, the test light on the front of the camera
will blink once. At this moment, the camera operator may want
to adjust the distance setting, and/or change the direction or
height of the camera.
DOWnlOaD tO a COMputer
To transfer or view photos and videos on a PC, you must first
turn the camera off and use the USB cable (supplied) to connect
the camera to your computer. The computer will then recognize
the camera as a removable disk drive. Camera operator must
wait until the termination of computer software installation
(few seconds) before clicking on Desktop. Then, click on
removable disk and look to find folder with DCIM. Click on
the DCIM folder and all the photos and videos will be found in
100DSCIM folder. Photos and videos can be viewed, edited or
deleted with your computer’s software.
Taking the SD card out of the camera and inserting it in the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
English