USER MANUAL XCEL action cameras Models: XCEL HD XCEL HD2 v2.5 support.spypoint.com 1-888-779-7646 tech@spypoint.
ABOUT US THANK YOU FOR CHOOSING A SPYPOINT-XCEL PRODUCT. For 10 years, GG Telecom, makers of XCEL products and SPYPOINT surveillance cameras, has the mission to offer products that are easy to use, innovative, affordable and of exceptional quality. We promote family values and the involvement of our employees in all stages of development, manufacturing and product promotion. Our priority is to provide outstanding multilingual customer service.
Table of contents Package contents.............................................................. 4 Regulation....................................................................... 25 Components...................................................................... 5 Limited warranty............................................................. 26 Getting started.................................................................. 6 Repair service.............................................................
Package contents ACCESSORIES INCLUDED: Camera with slide adaptor 1 button remote control Camera with slide adaptor 2-way remote control Quick release stands with safety ring (2) Lithium-ion Polymer battery HDMI and USB cables Lens protector Carrying case Wrist strap Lens cleaning cloth XCEL stickers (3) Camo waterproof housing Bow mount Scope mount Head strap mount Clear waterproof housing 360° Roll bar mount Straight and 90° extender Curved adhesive mount (XCEL HD) (XCEL HD) (XCEL HD
Components Front view ON/OFF & START/STOP BUTTON BACK BUTTON MICRO HDMI PORT Bottom view MICROSD SLOT WIDE ANGLE LENS MODE BUTTON HEAT SINK MICRO USB PORT MOUNT SYSTEM MIC IN OK BUTTON MICROSD SLOT MIC SLIDE ADAPTOR ANCHORAGE 5
Getting started Inserting the microsd card Button function Insert a microSD memory card in the card slot, gold contacts facing up. The card is inserted correctly when a click is heard. : ON-OFF/ START-STOP 1. 2. M: Changes mode/ Next 3. OK: Confirm entries/ Zoom (+)* 4. BACK: Exit the menu/ Previous/ Zoom (-)* *XCEL HD2 only Removing the microsd card Lightly press the memory card into the camera once to pop it out of the slot and remove it.
Included accessories installation Waterproof housing Quick release stand with safety ring SPORT EDITION HUNTING EDITION 360° roll bar mount Bow mount 90° & straight extenders Scope mount Curved & flat adhesive mounts Head strap mount 7
Operation modes description of icons • button. The camera beeps if the To start recording a video, press the sound signal option is enabled. The recording time is displayed on the screen and the LED lights flash while recording. See Operation of the LED lights and screen depending on selected options section. • To increase the zoom (XCEL HD2 only), press OK and to decrease, press BACK. Refer to the subject distance table in the REMOTE CONTROL section to find which zoom level to use.
Operation modes Photo mode • Allows the user to see the current configuration of the PHOTO mode. 2 5 1 3 4 5 7 6 8 9 • • Time lapse mode The TIME LAPSE mode allows to take photos at predefined regular intervals.
Operation modes View mode • Here is the information displayed on the television screen depending on the mode selected (VIDEO, PHOTO or TIME LAPSE). Allows the user to see the number of recorded files and view videos/ photos when the camera is connected to a television. 1 2 PHOTO 3 1) 2) 3) 4) Battery level VIEW mode Number of recorded photos Number of recorded videos MODE INFORMATIONS VIDEO Mode icon, video resolution, battery level and remaining recording time.
Configuration modes Allows the user to set the camera options. Date/Time Navigating in the menu: -The M button to move among the choices -The OK button to select an option -The BACK button to return to the previous menu Allows the user to set the date (Year/Month/Day) and time (hour/minute). Use the OK button to confirm the entry and use the M and BACK button to adjust the digits. Note: When the camera is not powered for approximately 48 hours, it is possible that the date and time reset.
Configuration modes Operation of the LED lights and screen depending on selected options REMOTE CONTROL OPTION DEL LIGHTS OPTION Enabled ( ) ENABLED * ( and ) Disabled ( ) Enabled ( ) OPERATION OF THE LED LIGHTS AND SCREEN BEFORE RECORDING VIDEOS/PHOTOS OPERATION OF THE LED LIGHTS AND SCREEN WHEN RECORDING VIDEOS/PHOTOS • The 4 LED lights flash every 2 seconds to indicate that the camera is waiting for the signal from the remote control (when the video, photo or time lapse mode is shown on the
Configuration modes Note: When the remote control option is enabled (wireless mode [ ] ON), the camera goes into sleep after 2 minutes of inactivity to maximize battery life. To wake the camera from sleep, do one of the following actions: 1. Press the RECORD button on the remote control ( ). 2. Hold down the ON-OFF button on the camera for 3 seconds ( ).
Remote control • XCEL HD When the camera is on and the REMOTE CONTROL option is enabled, the remote control allows you to take videos and photos in the mode shown on the screen by pressing the START/STOP button. Wireless range up to 40 ft. SynchroniZation The remote control synchronizes automatically when the START/STOP button is used to take a video or photo. It is also possible to use only one remote control to control multiple cameras.
Remote control • XCEL HD2 When the camera is on and the REMOTE CONTROL option is enabled, the remote control allows the user to take videos and photos in the mode shown on the screen. It is also possible to enlarge the image up to 4x (720p and 480p only). The XCEL HD2 remote control is waterproof up to 16 ft. Remote control utilization Button Allows the user to change the recording mode (Video, photo or Time Lapse). Button Allows the user to start and stop the video and photo recording.
Remote control • XCEL HD2 Replacing the battery The light turns on to indicate that the batteries are drained. The remote control is powered by a lithium button battery CR2450. To replace the battery : 1. Use small pliers to remove the foam protecting the screws at the back of the remote. 2. Unscrew the 6 screws. 3. Open the cover and take out the battery. Dispose of properly. 1x 4. Install the new battery in as indicated. Battery polarity must be respected. 5.
Charging the battery battery LIFE The battery level is shown in the upper right corner of the screen in all camera modes. When the battery level is low, we strongly suggest to charge the battery before it is empty. If a video is being recorded and the battery level reaches 0%, the camera saves the file before shutting down. When the battery of the camera is fully charged, it is possible to record about 2 hours to 2.5 hours, depending of the different videos resolutions. To charge the battery: 1.
Memory card/ Transferring files to a computer Memory card Transferring files to a computer Using a memory card is required to record videos and photos. The camera is compatible with microSD memory card, up to 32 GB capacity (Class 4 or higher). Sold separately, see Available accessories section. TV Allows to transfer or to view videos/photos using a computer. HDMI 1. Before inserting or removing a card, turn off the camera to prevent damage to the files.
Maintenance of the camera STORAGE Warnings If the camera will not be used for an extended period, the camera should be stored properly. Remove the lithium-ion polymer battery from the camera before storing it. The storage temperature should be between -40 °C and + 60 °C (-40 °F and +140 °F). Lithium-ion polymer battery should be stored at around 50% state-of-charge. • • • Cleaning the lens • Install the lens protector (included) on the lens of the camera when it is used without the waterproof housing.
Troubleshooting/ Error messages Troubleshooting Problem Possible solutions Impossible to turn on the camera • Verify if there is a battery in the camera. • Charge the battery. Impossible to turn on the remote control • Change the batteries. The screen of the camera turns off (ENERGY SAVING) • The screen turns off in order to preserve the battery while still recording. To return to the screen, press the OK button. The camera turns off • Charge the battery.
Available accessories To obtain more information on the available accessories, go to xcelcam.com. Here are the accessories available for the XCEL cameras.
Available accessories PROTECTION AND OTHERS ACCESSORIES XHD-SM Suction mount XHD-360RBM Roll bar mount XHD-SSM Sling stud mount XHD-TPM Tripod mount XHD-FOG Anti-fog inserts MA-360 Camera mount MEMORY MICROSD 16GB/32GB 22 XHD-TL Tether leash XHD-MIC External microphone
Specifications • XCEL HD Video recording Power source Video resolution 1080p/30ips 720p/30ips 480p/60ips Lithium-ion polymer battery File format .mp4, codec H.264 2.4" W x 1.7" H x 1.6" D Rechargeable lithium-ion polymer battery Dimensions Photo Recording Weight Photo resolution 1, 3, 5 MP File format JPG 2.9 oz (camera with battery) 5.7 oz (camera with battery and housing) Time Lapse option Predefined intervals from 0.
Specifications • XCEL HD2 Power source Video recording Video resolution 1080p/30ips 720p/60ips 480p/60ips Lithium-ion polymer battery File format .mp4, codec H.264 2.4" W x 1.7" H x 1.6" D Rechargeable lithium-ion polymer battery Dimensions Photo Recording Weight Photo resolution 5, 8, 12 MP File format JPG 2.9 oz (camera with battery) 5.7 oz (camera with battery and housing) Time Lapse option Predefined intervals from 0.
Regulation FCC and IC regulations FCC Part l5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Limited warranty and repair Instructions for repair service GG Telecom will repair the product without charge or replace it at its discretion with an equivalent product, if it has a manufacturing defect covered by the warranty described previously. We will pay the shipping costs only for the return of the products covered by the warranty. The shipping costs for an item sent to us will be assumed by the customer.