User Manual

PHOTO MODE

• Allows the user to see the current conguration of the PHOTO mode.

1) Battery level

2) Photo mode

3) Photo resolution

4) Multi-shot option

5) Remote control (wireless)

6) Zoom 1x to 4x (only XCEL HD2)

7) Sound signal

8) LED lights

9) Estimated number of photos that can be taken

before the card is full

• To take a photo, press the

button. The camera beeps if the sound

signal option is enabled and the LED lights ash to indicate that a photo

was taken. See OPERATION OF THE LED LIGHTS AND SCREEN DEPEND-

ING ON SELECTED OPTIONS.

• To increase the zoom (XCEL HD2 only), press OK and to decrease, press

BACK. Refer to the subject distance table in the REMOTE CONTROL sec-

tion to nd which zoom level to use.

TIME LAPSE MODE

The TIME LAPSE mode allows to take photos at predened regular intervals.

• Allows you to see the current conguration of the TIME LAPSE mode.

1) Battery level

2) Time lapse mode

3) Time interval between each photo

4) Photo resolution

5) Remote control (wireless)

6) Zoom 1x to 4x (only XCEL

HD2)

7) Sound signal

8) LED lights

9) Estimated number of photos that can be taken

before the card is full

• To start taking photos, press the

button. The camera beeps if the

sound signal option is enabled and the LED lights ash to indicate that

photos are being taken. See OPERATION OF THE LED LIGHTS AND

SCREEN DEPENDING ON SELECTED OPTIONS section.

• To increase the zoom (only XCEL HD2), press OK and to decrease, press

BACK. Refer to the subject distance table in the REMOTE CONTROL sec-

tion to nd which zoom level to use.

• To stop taking photos, press the button.

Note: This option allows the user to obtain photos of fast moving subjects.

Operation modes