Installation Manual

31169-601-01 Square D

Intelligent Load Center

10/2006 Keep Out Areas

ENGLISH

Keep Out Areas

NOTE: When planning load center wiring, consideration should be

given to the future addition of the generator power and control wiring.

Generator Fill-Out Kit

A generator fill-out kit will be used to fill out the enclosure for the

automatic transfer mechanism. The generator fill-out kit must be

ordered separately.

NOTE: Do not connect the generator to the load center without the

generator fill-out kit.

Figure 3: Indoor Intelligent Load Center Keep Out Areas

A. Reserve for the fuse

holder and wireway

definers

B. Reserve three

termination positions for

the generator neutral kit

C. Reserve for the 2-pole

generator circuit breaker

D. Reserve for the

generator terminal block

NOTE: Wiring may be

run over the top of the

terminal.

E. Reserve three

termination positions for

ATS harness ground

connection

F. Reserve for the

generator transfer

mechanism control

interface

G. Reserve for future options

H. Reserve one termination

position for ATS harness

neutral connection