Energy Guide

ManualsBrandsSquare D ManualsGenerator Accessories100 Amp 240-Volt 3-Pole 3-Phase Fused Outdoor General Duty Safety Switch

3-13

www.se.com/us

Special Applications Heavy Duty Safety Switches

Class 3110 / Refer to Catalog 3100CT1602

Krydon

Enclosures—NEMA Type 4X

H361DX

Krydon enclosures are compression molded of fiberglass reinforced polyester, specially

formulated to withstand attack from almost any corrosive atmosphere found in the

toughest industrial application. Switches are furnished with watertight hubs and

equipment grounding lugs. See CAD drawing of the switch to verify the UL listed short

circuit current rating or the enclosed safety switch catalog. UL Listed.

Table 3.20: Krydon

Enclosures — NEMA Type 4X 3 Pole 600 Vac, 600 Vdc

Amperes

Cat. No.

Solid Neutral

Assembly Kit

Class R Fuse

Kits

Electrical Interlock Kits

Field-Installed Cat. No.

Horsepower Ratings– 3Ø

Hubs [40]

480 Vac [41] 600 Vac [41] 600 Vdc [42]

Cat. No.

1 NO/1 NC

Contact

2 NO/2

NC Contacts

Std. Max. Std. Max. Max.

Fusible—3P, 600 Vac, 600 Vdc

30 H361DX H60SN RFK06 9999TC10 9999TC20 5 15 7-1/2 20 15 3/4

60 H362DX H60SN RFK06H 9999TC10 9999TC20 15 30 15 50 30 1-1/4

100 H363DX SN0610 RFK10 9999TC10 9999TC20 25 60 30 75 50 2

Non-Fusible—3P, 600 Vac, 600 Vdc

30 HU361DX H60SN — 9999TC10 9999TC20 — 20 — 30 15 3/4

60 HU362DX H60SN — 9999TC10 9999TC20 — 50 — 60 30 1-1/4

100 HU363DX SN0610 — 9999TC10 9999TC20 — 75 — 75 50 2

NEMA Type 7 and 9

H60XFA

An enclosed automatic molded case switch for use in Divisions 1 and 2 of the following:

Class I, Groups C and D; Class II, Groups E, F and G; or Class III, Hazardous Locations

as defined in NEC

Article 500. Furnished with threaded conduit openings in both top

and bottom endwall. Suitable for use as service equipment and listed as “Raintight’’ for

outdoor applications. cULus Listed. Equipment grounding lugs supplied as standard. See

CAD drawing of the switch to verify the UL listed short circuit current rating or the

enclosed safety switch catalog.

Table 3.21: NEMA Type 7/9, 3 Pole Molded Case Switch, 600 Vac, 250 Vdc

[43], Short

Circuit Current Rating 10 kA AIR

Amperes

Enclosed Molded

Case Switch [44]

Solid Neutral

Assembly

Horsepower Ratings—3Ø

Size of Threaded

Conduit

Openings

Provided (in.) [45]

Cat. No. Cat. No. 240 Vac 480 Vac 600 Vac

60 H60XFA 100SNA 15 30 50 3/4

H60XFA1212 [46]

100SNA 15 30 50 3/4

100 H100XFA 100SNA 30 60 75 1-1/4

100

H100XFA1212[46]

100SNA 30 60 75 1-1/4

225

H225XJG[47]

225SNA 60 125 150 2-1/2

225

H225XJGAA[47] [46]

225SNA 60 125 150 2-1/2

SAFETY SWITCHES

[40] Two hubs and hub drilling template are provided for field installation.

[41] Std.—Using fast acting one time fuses. Max.—Using dual element time delay fuses.

[42] For switching dc, use two outside switching poles.

[43] For switching dc, use two outside switching poles. Not for use on dc motor applications.

[44] Includes PKDB1, breather and drain kit, required for rainproof application.

[45] Threaded conduit opening provided in top and bottom endwall.

[46] Includes 1NO/1NC auxiliary contacts.

[47] Not cULus listed due to wire bending space.

9/13/2019