Energy Guide

3-18
© 2019 Schneider Electric
All Rights Reserved
Heavy Duty Safety Switches Accessories and Special Features
www.se.com/us
Class 3110 / Refer to Catalog 3100CT1602
Equipment Grounding Kits
Equipment grounding kits are available for factory or field installation. For factory
installation of equipment grounding kit, add suffix GL to standard Cat. No. (Example:
H361GL).
Table 3.34: Equipment Grounding Kits and Terminal Data
[81] [82]
Amperes
Series Number
Standard
Cat. No.
Terminal Data
AWG/kcmil
Optional Copper Only
Cat. No.
Terminal Data
AWG/kcmil
30 F5–F6
GTK03 [83]
(2) 14-4 Cu or (2) 12-4 Al
or
(4) 14-12 Cu or (4) 12-10 Al
GTK03C [83] [84] (2) 14-6 Cu
60
F5–F6
(600 V)
GTK0610
(2) 14-1/0 Cu or (2) 12-1/0 Al
and
(2) 14-6 Cu or (2) 12-6 Al
GTK0610C
(2) 14-1/0 Cu and
(2) 14-6 Cu
60
F5–F6
(240 V)
GTK03
(2) 14-4 Cu or (2) 12-4 Al
or
(4) 14-12 Cu or (4) 12-10 Al
GTK03C
(2) 14-6 Cu
100 F5–F6 GTK0610
(2) 14-1/0 Cu or (2) 12-1/0 Al
and
(2) 14-6 Cu or (2) 12-6 Al
GTK0610C
(2) 14-1/0 Cu and
(2) 14-6 Cu
200 F5–F6 PKOGTA2
(2) 10-2/0 Cu or
(2) 6-2/0 Al
PKOGTC2
(2) 14-4 Cu
400 and 600 E4–E5
PKOGTA2 [85]
(2) 10-2/0 Cu or
(2) 6-2/0 Al
PKOGTC3
(4) 14-1/0 Cu
800 E4 PKOGTA7
(4) 4-350 Al/Cu
— —
1200 E4 PKOGTA8
(8) 4-350 Al/Cu
— —
Special Paint and Touch-Up Paint
UL Listed heavy duty switches are available painted with special safety colors. To order
safety colored switches, add suffixes from the Safety Colors table to the standard switch
catalog number.
Not available on NEMA Type 4X Fiberglass, Krydon, NEMA Type 4/4X/5 Stainless Steel
nor NEMA Type 7 and 9 switches.
All colors comply with OSHA Standard 1910.144 and ANSI Specification Z535.1 for
marking physical hazards.
Table 3.35: Safety Colors
[86]
Safety Color
Suffix
Safety Color
Suffix
Black SP0 Blue SP6
Red SP2
Purple
SP7
Orange
SP3
Gray SP8 [87]
Yellow SP4
Gray ANSI 61
SP861
Green SP5 White SP9
Table 3.36: Square D Gray Touch-Up Paint
Description
Cat. No.
12 oz. Aerosol Paint Can, Square D ANSI-49 Gray Touch-Up Paint
PK49SP
NOTE: Minimum quantity of 6 required.
Lock-Off Guard Kits [88] [89]
Optional Lock-OFF Guard Kit Installed
Available factory- or field-installed the lock-off guard works by covering the lockout/
tagout opening whenever the switch is in the ON position. This prevents a padlock from
being inadvertantly inserted into the switch lockplate. The device is designed to help
prevent accidental misapplication of a lockout device. These kits are marked cURus (UL
Component Recognized) for field or factory installation.
Table 3.37: Lock-Off Guard Kits
Switch Rating
Cat. No.
30 A
LOGK1
60 A 240 V
60 A 600 V
LOGK2
100 and 200 A
3
SAFETY SWITCHES
[81] For series not shown in table refer to the switch wiring diagram.
[82] Equipment Ground Kits (Al/Cu) are factory installed standard in 30-200 A Series F NEMA Type 4/4X/5 (stainless steel), 12 and 12K. Equipment Ground Kits are standard factory installed on
all receptacle switches and all Series F 30-200 A, 4 and 6 pole switches.
[83] H2212AWK accepts GTK03 or GTK03C. H3612A or AWK accepts GTK03C. H3612 and H3612RB accepts GTK0610 HU3612AWK accepts GTK03C. HU3612A accepts GTK0610C.
HU3612RB accepts GTK0610 or GTK0610C.
[84] Optional copper equipment grounding kit for the 4 and 6 pole 30 A F Series: H461DS, H461AWK, HU461DS, HU661DS and HU661AWK accepts GTK03C HU461AWK accepts GTK0610C.
[85] Two required if equipment grounding conductors are run in parallel.
[86] A minimum quantity of 10 is required.
[87] Standard Square D ANSI 49 grey paint, when selecting this suffix, switches will receive additional coat of paint.
[88] Available factory assembled or as a field installable kit on NEMA Type 1, 3R, 12 or 12K switches. Not available for use on NEMA Type 4X Fiberglass, Krydon, NEMA Type 4/4X/5 Stainless
Steel nor NEMA Type 7 and 9 switches.
[89] For factory installation add suffix LOG to the standard switch catalog number.
9/13/2019