Energy Guide

3-34
© 2019 Schneider Electric
All Rights Reserved
Photovoltaic Disconnect Switches
1000 Vdc Photovoltaic Heavy Duty
Disconnect Switch
www.se.com/us
Class 3110
1000 Vdc Photovoltaic Heavy Duty Disconnect Switch
Put over 100 years of Schneider Electric’s experience as a global specialist in energy
management to work on your photovoltaic (PV) project. The Square D 1000 Vdc
disconnect switch is the perfect solution for your 1000 Vdc, PV disconnect applications. It
is compact and available in both a 100 and 200 amp non-fusible versions. IEC 60947-1
and UL 98 certified (file E343341).
Extended Life Expectancy
•
Exceeds IEC 60947-3 mechanical endurance requirements by factor of 18
•
Exceeds IEC 60947-1 electrical endurance requirements by factor of 10
•
Exceeds NEMA KS-1 mechanical endurance requirements by factor of 3.
Designed for Harsh PV Environments
•
NEMA Type 3 and IP63 enclosure
•
Resists windblown dirt/dust
•
Exceeds NEMA Type 1, 3R and 12
•
Operating range of -37°C to 50°C
•
Specially designed PV paint reduces solar gain up to 35%
over standard grey enclosures
Easy to Install
•
Preconfigured solar solution
•
Familiar enclosed safety switch design
•
Suitable for both grounded and ungrounded PV
Table 3.59: 1000 Vdc Photovoltaic Heavy Duty Disconnect Switches [1] [2] [3] [4]
System
NEMA Type 1, 3R, 12, 3
and IP63
Dimensions
Height
(in.)
Width
(in.)
Depth
(in.)Amperes
Cat. No.
3 Pole Grounded [5]
100 REHU393IP 22.13 18.63 8.75
200 REHU394IP 22.13 18.63 8.75
4 Pole Ungrounded
100 REHU493IP 29.00 18.63 8.75
200 REHU494IP 29.00 18.63 8.75
200 A Enclosed Switch Dimensions
Table 3.60: 200 A Enclosed Switch—Approximate Dimensions
Switch
H W D
in. mm in. mm in. mm
100 A 21.75 552 18.86 479 8.75 197
200 A 29.00 737 18.86 479 8.75 197
3
SAFETY SWITCHES
[1] Order EIK1PV for single contact field-installed kit.
[2] Order EIK2PV for double contact field-installed kit.
[3] Terminal block accommodates (2) 250 max Cu or (1) 1/0 max Cu wiring; Order SN20CPV for field-installed kit.
[4] Order REHGNDKIT for field installable ground lug kit.
[5] Terminal blocks standard with 3 pole switches; accommodates (2) 1/0 max Al/Cu or (2) 6 max Al/Cu wiring.
9/13/2019