How to Guide

Commercial Pressure and Float Switches for Power Circuits
Electromechanical Pressure Switches, Class 9013 Types F and G
27
03/2011
© 2011 Schneider Electric
All Rights Reserved
TM
Type FTG, 2-Pole, 2 N.C. Contacts
Degree of Protection IP20, NEMA Type 1
Flange Style
Fixed range of setting point
Contacts open on rising pressure
Differential Fixed
Fluid Connections 1/8" NPSF internal 1/4" NPSF internal 1/4" NPT external 1/4" bayonet (barbed) 90° elbow ¼" bayonet
Catalog Numbers
NEMA Type 1, IP20 9013FTG1 9013FTG2 9013FTG9 9013FTG10 9013FTG20
NEMA Type 3R
[1]
1
Must be mounted in a vertical position to maintain enclosure rating.
9013FTW1 9013FTW2 9013FTW9 9013FTW10 9013FTW20
Fluids Controlled Water Water Water Water Water
Pressure Range
Cut-out psig (bar) 20–65 (1.4–4.5) 20–65 (1.4–4.5) 20–65 (1.4–4.5) 20–65 (1.4–4.5) 20–65 (1.4–4.5)
Cut-in psig (bar)—————
Weight, lb (kg) 0.75 (0.340) 0.75 (0.340) 0.75 (0.340) 0.75 (0.340) 0.75 (0.340)
Supplemental Specifications (not shown under General Specifications)
Differential
psig (bar)
20 (1.4)
Maximum Allowable Pressure
psig (bar)
65 (4.5)
Cable Entry 2 cable entries 0.88 in. (22.4 mm) with 0.84 in. (21.3 mm) across flats
Pressure Switch Style Diaphragm
Ordering information Pressure codes
1. Select the catalog number from the table above.
2. Select the pressure code and add the code designation to the end of the catalog
number. Ensure that the pressure code falls within the limits of the device as
shown in the device listings.
3. If special features are desired, add the appropriate Form letter to the catalog
number after the pressure code. Arrange the Form letters in alphabetical
sequence when ordering more than one special feature.
4. Add the packaging code at the end of the sequence, after the Forms. (Sold in
lots or multiple of 500; for example: 9013FTG2J21C500.) If no packaging code is
indicated, the devices will be shipped individually packaged.
NOTE: Existence of a code does not imply that the code is available for
any or all devices.
Settings (psi) Code
5–21 J15
8–20 J16
20–40 J20
20–50 J18
30–50 J21
40–60 J24
50–70 J33
60–80 J25
Specify pressure settings J99