Use and Care Manual

Preventive Maintenance and Troubleshooting Guidelines for Class 9013F and 9013G Pressure Switches 9013DB0701
Data Bulletin 12/2007
Electrical equipment should be installed, operated, serviced, and maintained only by
qualified personnel. No responsibility is assumed by Schneider Electric for any
consequences arising out of the use of this material.
© 2007 Schneider Electric All Rights Reserved
Schneider Electric USA
8001 Knightdale Boulevard
Knightdale, NC 27545 USA
1-888-SquareD (1-888-778-2733)
www.us.SquareD.com
Recommended Protection Install electrical surge protection at the service entrance and in the control
box at the wellhead.
The installer should provide motor circuit overload protection in the pump
motor or control box (if used).
For Additional Information For additional information about common product catalog numbers, visit:
www.us.SquareD.com/pumptrol
Schneider Electric's Pumptrol product manager strives to provide the best
value and service to our Pumptrol customers. For answers to your specific
questions or comments about pumping solutions or products:
e-mail: [e-mail]
Technical Support Technical support is provided Monday through Friday between the hours of
8:00 a.m. and 6:00 p.m. EST. For more information, write or call:
Mailing address:
Schneider Electric Pumptrol Product Line
8001 Knightdale Boulevard
Knightdale, NC 27545-9023
e-mail: [e-mail]
Telephone: 1-888-SquareD (1-888-778-2733)