Installation & Assembly

.
© 2011 ICERA USA
3


CAUTION: Ensure that the water supply pressure is a minimum of 35 psi (2.5
kg/cm).Thetoiletwillnotfunctionproperlywithoutminimumpressure.


TOOLSANDMATERIALSREQUIRED(notsupplied)
 10”(254mm)adjustablewrench
 12”(305mm)pipewrench
 Metalfile(filecut)
 Tapemeasure
 Tubingcutter
 Level
 Hacksaw
 Puttyknife
 Screwdriver
 Toiletinstallationflange
 Toiletgasket(e.g.,waxseal)
 Water
supplyline
 Toiletsupplyshut‐offvalve,3/8”(10mm)recommended

PARTSPROVIDED
 Toiletseat
 ToiletT‐bolts(2x),5/16”(8mm)diameter


NOTICE: If the existing toilet does not have a supply shut‐off valve below the
tank,installonebeforeinstallingthenewtoilet.
