Instructions

14
Operation/functions
Inserting the batteries
Unscrew the fixing screw (fig. 1) and remove the cover of the battery
compartment. It is essential to ensure the indicated polarity when
inserting the battery cells into the battery case (fig. 2). Slide the cover
on the housing and tighten the screw.
Fig. 1 Fig.2
Switching on/off the radio set
Push the On/Off key, a double beep sounds and the color of the channel
which was activated last lights up.
By pushing the On/Off key once again the radio is switched off, a single
beep sounds.
Channel selection
Select one of the six channels by means of the channel key (see table),
every change is confirmed by a beep. With a long keystroke the
channels will be changed consecutively. stabo freecomm 100 offers
a channel memory function: the channel which was activated last
remains stored.
Note: Always adjust both radio sets to the same channel!