User Manual

OPENING THE SAFE USING YOUR
FINGERPRINT
CLEARING THE MEMORY
To clear the memory of all recorded ngerprints,
locate the reset buon on the inside of the case
and press this buon for about 5 seconds until
the green light ashes 10 times with 10 beeps (if
the sound is turned on) . All recorded scans will
be erased.
NOTE: For security you must record a
ngerprint. Failure to do so will compromise
the safety and security of the case.
To open the case, press the scanner with a recorded
nger. e blue light will come on with one beep (if
the sound is turned on) and the scan will begin.
If the green light ashes twice with 2 beeps (if the
sound is turned on), the scan has been accepted and
the lid will open.
If the red light ashes once, the scanner did not read
your ngerprint and you must try again. If the red
light ashes 3 times, the scanner read your ngerprint
and did not accept it.
If there are 3 rejected scans, where your ngerprint
was read, and the red light ashes 5 times with 5
beeps (if the sound is turned on), you will have an
automatic lockout for 60 seconds before you can
try a scan again. e case will beep one time (if the
sound is turned on) and the green light will ash
once when the lockout period is over.
If there is 1 more rejected scan where your ngerprint
was read and the red light ashes 5 times with 5
beeps (if the sound is turned on), you will have an
automatic lockout for 5 minutes before you can try a
scan again. e case will beep one time (if the sound
is turned on) and the green light will ash once when
the lockout period is over.
To close the case, push the lid closed until locked.
A
A
4 3 2 1
4 3 2 1
A
B
C
D
A
B
C
D
STACKON_C_MM-IN 21JUL14 JMD
PARTS LIST
ITEM
QTY U/M PART NUMBER DESCRIPTION
1 1 EA. PA-0803 BODY, ASSEMBLY
2 1 EA. 3400 LOCK ASSEMBLY
3 1 EA. P-0582 CLIP, QUARTER-TURN LATCH
4 1 EA. P-0388 CAM, LOCK, KEY
5 1 EA. PA-0224 LOCK, ASSEMBLY
6 2 EA. P-0454 NUT, LOCK, M4X0.7, W/ EXT TOOTH, STL, ZP
7 1 EA. P-0556 DOOR STOP
8 2 EA. P-0584 WASHER, M3.5 X 0.5, 12 OD, STL, BO
9 2 EA P-0583 SCREW, TC, PH, PH, #6 X 5/16, STL, ZP
10 1 EA. PA-0878 FACEPLATE ASSEMBLY
11 6 EA. P-2202 SCREW, M3-1.12 X 4.5L FLANGE HEAD, PH, STL, ZP
12 4 EA. P-0590 TAPE, DOUBLE SIDED, 2" WIDE
13 1 EA. P-0517 FOAM, EGG CRATE, PC-0650
DESCRIPTION OF CHANGEDATEENGREV
08APR1509APR15PRHA
A
SHEET 1 OF 4
C
08APR15PRHPORTABLE CASE WITH BIOMETRIC LOCK
PFA-0094
DATE:DRAWN BY:DESCRIPTION:
REVISIONPROE DRAWING NUMBERFORMAT
08APR15PRHN/A
N/A
1360 OLD RAND ROAD, P.O. BOX 489
WAUCONDA, IL 60084
PH: 847-526-1611 FAX: [phone]
DATE:DESIGNED BY:FINISH:MATERIAL:
DIMENSIONS: MM [IN]
ANGLES: 1
2 [0.1]
.8 [0.03]
.40 [0.015]X.XX
X.X
X
PC-650-B NEW
ALL PRODUCT INFORMATION ENCLOSED ON THIS
DOCUMENT IS PROPERTY OF STACK-ON PRODUCTS. ANY
AND ALL USE OF THIS INFORMATION WITHOUT CONSENT
OR PERMISSION FROM STACK-ON PRODUCTS IS NOT
PERMITTED.
STANDARD TOLERANCES (UNLESS OTHERWISE NOTED)PROJECT:
SEE
DETAIL
B
SECTION A-A
DETAIL B
SCALE 2.000
PA-0803
1
P-0556
1
P-0388
1
PA-0224
1
P-0454
2
3400
1
40657-1512
3
12