Installation Instructions

24
REPAIR OF ROOFKIT RUBBER
ROOFING MEMBRANE
If your RoofKit Rubber Roong Membrane is punctured or
torn, repairs can be made easily by:
1. Cleaning and priming the membrane with Seam Primer at
least four inches (4") in all directions from the puncture or
tear.
2. After the primer has ashed off, cut a piece of Cover Strip
three inches (3") larger than the puncture or tear and round
all corners. Remove backing and place over puncture.
3. Hand roll the entire Cover Strip with a steel or hard
rubber roller.
4. Seal all exposed edges with RoofKit Rubber Caulk.
DO NOT USE ASPHALT ROOF CEMENT ON ROOFKIT
RUBBER ROOFING MEMBRANE.
For small repairs, RoofKit Patch Kits are available.