Installation Instructions

22. What happens if the RoofKit Latex Bonding

Adhesive freezes?

This could damage the adhesive and affect its

performance.

23. How do I use the RoofKit Multi-Purpose

Bonding Adhesive?

The Multi-Purpose Bonding Adhesive can be used for

any application on the roof: adhering the membrane

to a substrate or membrane-to-membrane seaming.

This adhesive must be applied to both the membrane

and the substrate in a thin coat using a small-nap paint

roller. Allow the adhesive to dry (tacky), then bring the

membrane and substrate together in a contact fashion. All

membrane-to-membrane applications require the cleaning

of both surfaces with RoofKit Seam Primer, using a

scrub pad. Apply the adhesive to both surfaces with a 3"

paint brush. Allow the adhesive to dry, then bring both

membranes together.

24. How do I use the RoofKit Contact Adhesive?

RoofKit Contact Adhesive is used to adhere EPDM

membrane to a substrate using a small-nap paint roller.

Apply the adhesive to both the membrane and the

substrate, allow to dry tacky to the touch, then bring

together the membrane and the substrate in a contact

fashion.

25. How long does it take for the adhesive to set up or dry

to a tacky touch?

For RoofKit Multi-Purpose and Contact Adhesives,

drying time is usually 15 to 30 minutes depending on

temperature and humidity. For RoofKit Latex Adhesive,

the membrane must be installed while the adhesive is still

wet.

26. How do I adhere RoofKit EPDM membrane

to a wall?

Apply RoofKit Multi-Purpose or Contact Adhesive on the

wall and the membrane using a small-nap paint roller.

Allow the adhesive to dry to a tacky touch. Then place the

membrane on the wall in a contact fashion.