Installation Instructions

6
INSTALLATION
Unroll the RoofKit Rubber Roong Membrane over the
substrate so that the sheet is in the desired position and is
wrinkle free. If more than one roll of membrane is required,
subsequent rolls must over lap the prior roll a minimum of four
inches (4") for seaming. Care should be taken to ensure the
membrane overhangs the perimeter of the roof at least three
inches (3").
Allow the RoofKit Rubber Roong Membrane to relax for
approximately 30 minutes depending upon weather conditions.
Fold the membrane onto itself so that one-half (1/2) of the
underside of the membrane is exposed. Take care to avoid
wrinkles. See Figure 2.