Instruction Manual Contents « instruction « Siding » Troubleshooting Product overview 1. Bolts 2. Reset Button 3. Battery Compartment 4. Knob & Emergency Lock Cover 6. Green Light 7. Red Light 8, Yellow Light 9. Confirming hurt an Troubleshooting The safe won’t open, when | enter my aced. « Make sure you entered the correct code, * Press the “A" or “after entering the code. + You might be in blackout mode. Wait 5 minutes and try again = Replace the batteries. The door won't shut, 1.
Opening your safe for the first time { Use your emergency key the first time you pen your safe, if you tee't know the corded, or i there is an electronics circuit malfunction. 1. Remove emergency lack cover. 2. Insert the emergency key and trim it counter clockwise, 3. Turn the knob clockwise to open the door. Securing the safe Fix the safe in the place which is not easy to move. L. Dr fl holes for expansion boisterous clamping screws} in the right place 2.
Setting the user code 1. With the door open, press the Reset button. You will hear two beeps, and yellow fight goes on. 2. Input the new aced {3-8 digits) on the keypad, then press the “A” or”B” button to confirm with 2 buzzer beeps, If the yellow light flashes with 3 buzzer beeps, the code reset Is not accepted and you need to try again. 3. Before you close the door, try the new code to make sure it works. Setting the master code 1.