- Stamina Products, Inc Elliptical Trainer User Manual

ASSEMBLY INSTRUCTIONS

STEP 3

Connect the LOWER CONNECTION WIRE(31) to UPPER CONNECTION WIRE(32). Insert the

UPRIGHT(4) onto the MAIN FRAME(1) and secure with BUTTON HEAD BOLTS(M8 x 20mm)(68),

LOCK WASHERS(M8)(78), and WASHERS(M8)(79).

STEP 4

Connect the LEFT and RIGHT PEDAL ARMS(10, 11) to the PEDAL ARM CONNECTORS(12) with

BUTTON HEAD BOLTS(M10 x 55mm)(69), WASHERS(M10)(80), and NYLOCK NUTS(M10)(76).

STEP 5

Attach the PEDAL CAPS(45) onto the LEFT and RIGHT PEDAL ARMS(10, 11) with ROUND HEAD

BOLTS(M6 x 25mm)(65). Slide the PEDAL DIVIDERS(46) into one of the four slots on the PEDAL

CAPS(45) to fit your shoes. You may select the front or the back of the PEDAL CAPS(45) for foot

placement. You will have more vertical movement in the Elliptical stride if you place your feet at the back of

the

PEDAL CAPS(45).

CAUTION:

The lip on the PEDAL CAPS(45) must face inside. The sides without a lip face outside as

shown.