- Stamina Products, Inc Elliptical Trainer User Manual

ASSEMBLY INSTRUCTIONS

Tie

STEP 5

Slide the PIVOTING ARMS(6) onto the SHAFT on the UPRIGHT(4) on both sides and secure with

WASHERS(M8)(65), LOCK WASHERS(M8)(68), and BUTTON HEAD BOLTS(M8x1.25x20mm)(52).

STEP 6

There is a tie on the lower end of the PIVOTING ARM(6) at right side to keep the parts in place during

shipping. Use scissors to cut the tie. Slide the lower end of the PIVOTING ARM(6) into the bracket on the

PEDAL ARM(5), and secure with BUTTON HEAD BOLT(M10x1.5x76mm)(49), WASHER(M10)(63), and

NYLOCK NUT(M10x1.5)(69). Repeat to attach the opposite side.