User's Manual

STORAGE
14
1.
2.
3.
4.
MAINTENANCE
The safety and integrity designed into the SpaceMate E300 can only be maintained when the SpaceMate
E300 is regularly examined for damage and wear. Special attention should be given to the following:
Adjust the TENSION KNOB(21) and verify that the Flywheel System provides tension. The Flywheel
System should provide many years of use.
Verify that the WARNING LABEL(85) is present and legible. Replace the WARNING LABEL(85) if it is
missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the SpaceMate
E300 removed from
service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the SpaceMate
E300.
Keep your SpaceMate E300 clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
To store the SpaceMate
E300 simply keep it in a clean dry place.
The minimum rest dimensions of the SpaceMate
E300 are approximately 32 1/2" long x 23 1/8" wide x
54 3/8" tall. These dimensions may vary. Please measure your SpaceMate
E300 if exact dimensions
are needed.
Grasp the pivot tubes on the HANDLEBARS(81, 82) and REAR STABILIZER(3) to move the SpaceMate
E300, two people are required for moving. Do not use the Pedal Arms to move the SpaceMate E300.
To avoid damage to the METER(33), remove the batteries before storing the SpaceMate E300 for one
year or more.