User's Manual

ASSEMBLY INSTRUCTIONS
9
STEP 10
Attach the LINKAGES(80) to the LEFT and RIGHT PEDAL ARMS(4, 5) at both sides with the PLASTIC
WASHERS(M8)(69), BUTTON HEAD BOLTS(M8x1.25x18mm)(75), WASHERS(M8)(70) and NYLOCK
NUTS(M8x1.25)(62).
STEP 11
Look down from the top of the UPRIGHT(6) to make sure the pivot tubes on the PIVOT ARMS(79) are
parallel to the FRONT STABILIZER(2) and the PEDAL ARMS(4, 5) are crossing the ROLLERS(39) properly.
Tighten the BUTTON HEAD BOLTS(M8x1.25x57mm)(49) on the UPRIGHT(6).
Look down from the top