User's Manual

Page 29GX3000E
8.12 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Prior-
ity scan” scans the channels programmed in memory with the priority channel.
8.12.1 Selecting the Scan Type
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu
appears.
2. Press the
[
ENT
]
key, then select “
SCAN TypeSCAN Type
SCAN TypeSCAN Type
SCAN Type” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
Prior-Prior-
Prior-Prior-
Prior-
ityity
ityity
ity
” or “
MemoryMemory
MemoryMemory
Memory.”
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
8.12.2 Memory Scanning
(
M-SCAN
)
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the CHANNEL selector knob.
Press and hold the
[
SCAN
(
MEM
)]
key for one sec-
ond, “MEM” will appear on the LCD which indicates
the channel has been programmed into the trans-
ceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
(
MEM
)]
key for one second, “MEM” will
disappear in the LCD.
5. To start scanning, just press the
[
SCAN
(
MEM
)]
key momentarily. “
M-SCANM-SCAN
M-SCANM-SCAN
M-SCAN”
appears on the LCD. Scanning will proceed from the
lowest to the highest programmed channel number
and will stop on a channel when a transmission is
received.
6. The channel number will blink during reception.
7. To stop scanning, press the
[
16/9
]
or
[
WX
]
key.