User's Manual

Page 63GX3000E
10.4 TIME LOCATION
This selection selects the time display between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing and holding the
[
H/L
(
NAV
)]
key.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
Time Disp.Time Disp.
Time Disp.Time Disp.
Time Disp.” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
UTCUTC
UTCUTC
UTC” or
“
LocalLocal
LocalLocal
Local.”
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
In the local time mode, the display shows the time by the 12-hour system.
Meanwhile, the display shows the time by the 24-hour system in the UTC mode.
10.5 TRUE MAGNETIC CHANGE
(
NAV display
)
This selection allows customising the GPS COG (Course Over Ground) dis-
played on the LCD to be in True or Magnetic.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
MagneticMagnetic
MagneticMagnetic
Magnetic” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
OnOn
OnOn
On” (rep-
resenting “Magnetic”) or “
OffOff
OffOff
Off” (representing “True”).
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
(
“UTC” mode
)(
“LOCAL” mode
)