User's Manual

GX3000EPage 66
10.10 WX ALERT
This selection allows the radios NOAA Weather alert to be turned off. Default
setting is ON.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
WX AlertWX Alert
WX AlertWX Alert
WX Alert” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select the de-
sired WX alert mode. The WX alert mode can be set
to “
On SCANOn SCAN
On SCANOn SCAN
On SCAN,” “
On WXOn WX
On WXOn WX
On WX,” “
On SCANOn SCAN
On SCANOn SCAN
On SCAN/
WXWX
WXWX
WX,” or “
OffOff
OffOff
Off.”
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
10.11 VOICE SCRAMBLER
(
R
EQUIRES OPTIONAL CVS2500 S CRAMBLER U NIT
)
This menu is used to setup the channels to be scrambled and the scrambler
code.
NOTE
This menu will not appear unless a CVS2500 is installed.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
ScramblerScrambler
ScramblerScrambler
Scrambler” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob .
3. Press the
[
ENT
]
key.
4. Select the operating channel to be scrambled with
the CHANNEL selector knob.
5. Press the
[
ENT
]
key to store the selected channel.
6. Turn the CHANNEL selector knob to change the
scrambler code. The scrambler code can be set from
“
00
00
0” to “
33
33
3” and “
OFFOFF
OFFOFF
OFF.” When “
OFFOFF
OFFOFF
OFF” is selected the voice
scrambler is disabled.
7. Press the
[
SCAN
]
key to store the scrambler code.
8. Repeat steps 4 and 7 to set other channels.
9. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
Note: Voice Scrambler may not be activated on Channel 16 and 70.