User's Manual

GX3000EPage 68
10.13 NAMING THE RADIO OR SECOND STATION MIC OR HANDSET
This function allows you to change the name of the RADIO or second station
microphones. Example: “RADIO - CABIN,” “RAM1 - HELM,” “RAM2 -
FLYBRIDGE.”
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
Unit NameUnit Name
Unit NameUnit Name
Unit Name” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select the Unit
(“
RadioRadio
RadioRadio
Radio,” “
Ram1Ram1
Ram1Ram1
Ram1,”or “
Ram2Ram2
Ram2Ram2
Ram2”) to be named, then
press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to scroll through
the first letter of the channel name.
6. Press the
[
ENT
]
key to store the first letter in the name
and step to the next letter to the right.
7. Repeat step 6 and 7 until the name is complete. The
name can consist of up to twelve characters, if you
do not use all twelve characters press the
[
ENT
]
key
to move to the next space. This method can also be
used to enter a blank space in the name. To clear the
previous letter, press the
[
CLR
]
key.
8. Press and hold the
[
ENT
]
key to enter the name and
return to the “
Unit NameUnit Name
Unit NameUnit Name
Unit Name” menu.
9. If you want to enter the name of another unit, repeat steps 4 through 8.
10. To exit this menu and return to radio operation mode press the
[
16/9
]
key.