User's Manual

10. INTERFACE
137
LZT 123 7361 R1A
10.6 ATE Command Echo
The setting of this parameter determines whether or not the DCE echoes
characters received from the DTE during command state and online
command state.
10.7 ATV DCE Response Format
Select either descriptive or numeric response codes. The ATV
command sets the verbose numeric response codes and strips off the
<S3><S4> additions to the command response.
Description Command Possible Responses
Request Command
Echo
ATE[<value>]
ATE=[<value>]
•OK
•ERROR
Show the current
setting
ATE? <value>
Show if the command
is supported
ATE=? E: (list of supported
<value>s)
<value> Description
0 DCE does not echo characters during command state and
online command state
1 DCE echoes characters during command state and online
command state. Default value
Description Command Possible Responses
Set DCE response
format
ATV[=]<value> •OK
•ERROR
Read the current
setting
ATV? V: <value>
Show if the command
is supported
ATV=? V: (list of supported
<value>s)
<value> Description
0 Display numeric result codes
1 Display verbose result codes. Default value