User's Manual

13. SHORT MESSAGE SERVICES - POINT TO POINT
193
LZT 123 7361 R1A
8-bit octets (refer to +CMGS). Message reference value <mr> is
returned to the TE on successful message delivery. Optionally, when
+CSMS <service> value is 1 and there is network support, <scts> is
returned. Values can be used to identify message upon unsolicited
delivery status report result code. If sending fails in a network or an ME
error, final result code +CMS ERROR: <err> is returned. This
command is abortable.
<fo> Description
0 First octet of SMS-DELIVER in integer format
1 First octet of SMS_SUBMIT in integer format
2 First octet of SMS-STATUS-REPORT in integer format
3 First octet of SMS-COMMAND in integer format
<ct> Description
Integer GSM 03.40 TP-Command-Type. Default value is 0
<pid> Description
0-255 Protocol Identifier in integer format. Default value is 0,
according to 07.05 section 9.2.3.9
<mn> Description
Integer GSM 03.40 TP-Message-Number
<da> Description
String type GSM 03.40 TP-Destination-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer command +CSCS). Type of address given
by <toda>
<toda> Description
String type GSM 04.11 TP-Destination- Address Type-of-Address octet
in integer format (when first character of <da> is +(IRA 43)
default is 145, otherwise default is 129
<mr> Description
Integer type GSM 03.40 TP-Message-Reference in integer format
<scts> Description
String type GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
format (refer to <dt>)