User's Manual

GM29 INTEGRATOR’S MANUAL
64
LZT 123 7361 R1A
2.4 ATH Hang up
Signals the MS to terminate an active call.
2.5 ATO Return to Online Data Mode
Switch to the on-line data mode from the on-line command mode during
an active call. Returns ERROR when not in on-line command mode.
2.6 ATP Select Pulse Dialling
Command is ignored, and is implemented for compatibility only. It
would normally cause the next D command to use pulses when dialling
the number.
2.7 ATT Select Tone Dialling
Command is ignored, and is implemented for compatibility only. It
would normally cause the next D command to use tones when dialling
the number.
Description Command Possible Responses
Terminate the call ATH •ERROR
•OK
Description Command Possible Responses
Return to on-line data
mode
ATO[<value>] •CONNECT
•CONNECT <text>
•NO CARRIER
•ERROR
<value> Description
0 Return to on-line data state from on-line command
Description Command Possible Responses
Select pulse dialling ATP OK
Show if the command
is supported?
ATP=? OK
Description Command Possible Responses
Select tone dialling ATT OK
Show if the command
is supported?
ATT=? OK