User's Manual

GM29 INTEGRATOR’S MANUAL
74
LZT 123 7361 R1A
3.10 ATS10 Automatic Disconnect Delay Control
Included for compatibility. No functionality
3.11 AT*ECAM Ericsson Call Monitoring
This command activates or deactivates the call monitoring function in
the ME. When this log function is activated in the ME, the ME informs
about call events, such as incoming call, connected, hang up etc.
It is preferable that the current status shall always be sent with result
code *ECAV when activating the log function. The purpose of this is
two fold:
• to gather relevant information for the call log in a TE;
Description Command Possible Responses
Set Automatic
Disconnect Delay
Control
ATS10=[<val>] •OK
•ERROR
Read the current
setting
ATS10? <val>
Show if the command
is supported
ATS10=? S10: (list of supported
<val>s)
<val> Description
2 Remains connected for two tenths of a second. Default value
1-254 Number of tenths of a second of delay
Description Command Possible Responses
Set Call Monitoring on
or off
AT*ECAM=<onoff> •OK
•+CME ERROR: <err>
•OK
•ERROR
Read the current status
for Call Monitoring
AT*ECAM? •*ECAM: <onoff>
•+CME ERROR: <err>
•OK
•ERROR
Test if the command is
supported
AT*ECAM=? • *ECAM: list of
supported <onoff>s
•+CME ERROR: <err>
•OK
•ERROR