User's Manual

3. CONTROL AND STATUS
75
LZT 123 7361 R1A
• to make it possible for the TE to display call state information for an
ongoing call.
Examples
AT*ECAM?
*ECAM: 0
AT*ECAM=1
OK
3.12 AT*EDST Ericsson Daylight Saving Time
This command sets the daylight saving time hours.
Note! This command affects the MS clock set with the AT+CCLK command.
To avoid confusion it is recommended the daylight saving time (DST)
is set with this command before setting the actual local time with
AT+CCLK.
<onoff> Description
0 The call log function is disabled (off). Default value
1 The call log function is enabled (on)
Description Command Possible Responses
Set Daylight Saving
Time
AT*EDST=<dst> • +CME ERROR: <err>
•OK
•ERROR
Read current Daylight
Saving Time
AT*EDST? •*EDST: <dst>
• +CME ERROR: <err>
•OK
•ERROR
Show if the command
is supported
AT*EDST=? • *EDST: (list of
supported <dst>s)
• +CME ERROR: <err>
•OK
•ERROR
<dst> Description
0 Standard time
1 Daylight saving time, +1 hour
2 Daylight saving time, +2 hours