User's Manual

GM29 INTEGRATOR’S MANUAL
76
LZT 123 7361 R1A
3.13 AT*EMAR Ericsson Master Reset
This command requests the MS to reset user data. The user data in the
MS will be reset to the default values. This command also unlocks the
MS.
3.14 AT*EPEE Ericsson Pin Event
The command requests the MS to report when the PIN code has been
inserted and accepted.
Description Command Possible Responses
Perform a master reset
in the MS
AT*EMAR=<phone lock
code>
•+CME ERROR: <err>
•OK
•ERROR
Shows if the command
is supported or not
AT*EMAR=? •+CME ERROR: <err>
•OK
•ERROR
<phone lock code> Description
String Security code (phone lock code) must be verified
before performing the master reset, see also
AT+CLCK
Description Command Possible Responses
Requests the MS to
inform when the PIN
code has been
inserted
AT*EPEE=<onoff> •+CME ERROR: <err>
•OK
•ERROR
Test if the command is
supported
AT*EPEE=? • *EPEE: (list of
supported <onoff>s)
•+CME ERROR: <err>
•OK
•ERROR
Read the current status
for PIN Code Request
AT*EPEE? • *EPEE: <onoff>
•+CME ERROR: <err>
•OK
•ERROR
<onoff> Description
0 Request for report on inserted PIN code is not activated
(off). Default value
1 Request for report on inserted PIN code is activated (on)