Data Sheet

TECHNICAL DATA SHEET
SOLDER WIRE HS10
Developed to meet high quality requirements
in industrial electronic production as well as quick rework





STANNOL GmbH & Co. KG. • Issue: 29.10.2020 1
Haberstr. 24 • 42551 Velbert • Tel: [phone] • Fax: [phone] • E-Mail: [e-mail] • www.stannol.de
STANNOL
DESCRIPTION
The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high
quality requirements in industrial electronic production as well as for quick rework. The solder wire HS10 is very efficient by
its high activity, which results in quick spread of solder and electrical safe residues. It is a halide activated rosin (colophony)
flux. The solder wire HS10 according to J-STD-004 type ROM1
CHARACTERISTICS
This activated rosin shows following properties/advantages:
 Solid and dry residues, pin testable
 Fast soldering, high spread speed
 High reliability
APPLICATION
The solder wire HS10 can be used for hand and robot soldering in electronics and electrical assembly, audio devices and
telecommunication. Flux residues can remain on surfaces without cleaning. If cleaning is necessary for optical or technical
reasons, we recommend the use of the cleaner Stannol Flux-Ex 200B or Stannol Flux-Ex 500.
PHYSICAL PROPERTIES AND DATA
* This alloy is subject to a MOQ
Other alloys, diameters flux contents or reel sizes are available on request.
GENERAL PROPERTIES HS10
Flux type: ROM1 / J-STD-004
Flux content: standard 2.5 weight % ± 0.3 %
Halide content: 0.9%
Corrosion effect: None / J-STD-004
Standard alloys
acc. to ISO 9453:2014
Lead-containing: Lead-free (Ecoloy Serie)
S-Sn60Pb40 Ecoloy TS (S-Sn96.3Ag3.7)
S-Sn60Pb39Cu1 Ecoloy TSC (S-Sn95.5Ag3.8Cu0.7)
S-Pb60Sn40 Ecoloy TC (S-Sn99.3Cu0.7)
S-Sn62Pb36Ag2
Ecoloy TSC305 (S-Sn96Ag3Cu0.5)
S-Sn63Pb37* ---
S-Pb93Sn5Ag2 ---
Available diameters:
from 0.3 mm
Available reel sizes: 250 g, 500 g, 1 kg