Fitness Electronics User Manual

16 620-7991 Rev 002
STEP 20.
• Connect the 12 pin serial cable from the base frame neck to the 12 pin socket on the dis-
play.
• Connect the ground cable from the front display heart rate board to one of the terminals
on the display mount.
• Connect the heart rate cable from the display support tube to the heart rate board on the
display.
• Connect the DC power from the base frame neck to either one of the DC connectors on
the front display center console board.
• Connect the DC power from the PVS display neck to the other DC connector on the front
display center console board
• Connect the AV cables from the PVS display neck to the (2) AV connectors on the center
console board.
• Connect the ground cable from the front display center console to one of the terminals
on the display mount.
1
3
4
4
2
5
6