Fitness Electronics User Manual

620-7991 Rev 002

STEP 3. (E-TRx ONLY)

Note: If you have an E-TR skip this step.

Using a #2 Phillips screwdriver, remove the

screw that holds in the blank headphone jack

cap at the lower front of the Hot Bar. Retain the

screw.

You will no longer need the cap and, if desired, you

can store it away for any possible future use.

Now take the headphone jack from the iPod®

CC hardware kit. Connect the headphone jack

to the cable in the jack opening. Use the previ-

ously retained screw to reinstall the headphone

jack. Tighten snugly.

Skip ahead to Step 5.

STEP 1.

Using a #2 Phillips screwdriver, remove the (8)

screws from the upper back of the display.

Place the cover somewhere safe to keep it from

being damaged. Next, remove the (6) screws

from the lower back of the display. Place the

cover with the other one. Retain all the screws

for later use.

STEP 2.

Now remove the upper cap cover that has the

STAR TRAC logo on it. This cap is held in by

the upper back cover.

You will no longer need this cap cover and, if de-

sired, you can store it away for any possible future

use.

NSTALLING

OUR PVS

-TR

-TRx