Fitness Electronics User Manual

620-7991 Rev 002

STEP 17.

Replace the top back plastic cover. Using a #2

Phillips screwdriver insert the (8) screws, re-

tained from earlier step, into the plastic.

Do Not tighten screws at this time.

STEP 18.

Check the cap with the neck and grommet.

Make sure the cap is flush with the top back

plastic. Adjust if necessary. Use the screwdriver

to tighten the screws snug from the previous

step.

Caution: Do not over tighten screws.

This completes the installation of the Personal Viewing Screen on the E-TR / E-TRx treadmill.

Now it is time to set it up. Turn to the appropriate section for your Personal Viewing Screen.