Manualshelf

Use and Care Manual

ManualsBrandsSTARK USA ManualsOutdoor Power Equipment196 CC 6.5 HP EPA Engine Walk Behind soil Dirt Vibratory Plate Compactor Rammer
12345678910
ASSEMBLY
STEP 1. Put the engine to the engine support plate.Use pressure plate,M8 locknut and 8mm at gasket to
x the engine to the engine support plate.(The clutch and throttle lever has assembled on the engine)
STEP 2. Let the dust shield plate cover the vibrator pulley and engine clutch.Use M8*25 at gasket of
Outer hexagonal bolt and ange nut to x the dust shield plate,then lock it.Note you should adjust
the position to make the dust shield plate in the right way.
STEP 3. Put on the B-710 belt.Through moving the engine support plate to straighten the belt.Screw
up four M12 locknut to x the engine support plate.
3