Replacement Part List

10
! CAUTION
Inspection and other services should always be carried out on
hard and level ground with the engine shutdown
Inspection and Maintenance Service Tables
1 To make sure your plate compactor is always in good
working condition before using carry out the
maintenance inspection in accordance with Tables 1
through 3
TABLE1. MACHINE INSPECTION
NOURS OF
OPERATION
REMARKS
Every 8 hours
(every day)
Every 8 hours
(every day)
Every 8 hours
(every day)
Every 100 hours
Every 300 hours
replenish 500ml
Every 200 hours
Every 100 hours
! CAUTION
These inspection intervals are for operation under normal
conditionsAdjust your inspection intervals based on the
number hours plate compactor is in use and particular
working conditionsVibrator case uses 320# gear oil as
lubricant
! CAUTION
Fuel piping and connections should be replaced every 2
years.
TABLE2. ENGINE CHECK
ITEM
HOURS OF OPERATION
Oil or FueI Leak
Every 8 hours(every day)
Tightness of Fastening
Threads
Every 8 hours(every day)
Engine Oil Check and
Replenishment
Every 8 hours(every day)
(Replenish to specified maximum
level)
Engine Oil Replacement
After first 25 hours then every 50 to
100 hours
Air Filter Cleaning
Every 100 hours
See separate engine manual for details on engine check
Daily Service
Check for leakage of fuel or oil
Check for loose screws including tightnessSee Table 3
below(tightening torque)for re-tightening
TABLE3.
TIGHTENING TORQUE(in.kg/cm) Diameter
Material
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
4T
70
150
300
500
750
1,100
1,400
2,000
6- 8T
100
250
500
800
1,300
2,000
2,700
3,800
11T
150
400
800
1,200
2,000
2,900
4,200
5,600
*
100
300~
350
650~
700
*(In case counter-part is of aluminum)
(Threads in use with this machine are all right handed
Material and quality of material is marked on each bolt
and screw
Remove soil and clean the bottom of compaction plate
Check engine oil