Replacement Part List

ManualsBrandsStark ManualsOutdoor Power Equipment6.5 HP Gas Plate Compactor Vibratory Asphalt/Soil Plate with Folding Handle

B．Remove spark plug，clean and adjust the spark plug gap to

0.6-0.7mm(0.02-0.03 in.). Fig-15

C．drain the motor oil of the engine and replace with new

specified oil．

Fig-16

! NOTE：When the engine is new，the first oil change must be

made after 20 hours of operation．and replenish the oil tank

before operating．

7-3．Monthly Service

Change the oil in the vibrator assembly．

7-4．Storage

When storing the compactor for long periods after

operation．

A．Thoroughly drain the fuel from the fuel tank fuel

pipe and carburetor．

B．Pour a few drops of motor Oil into the cylinder by

removing the spark plug．

Rotate the engine several times by hand SO that the

cylinder interior is covered with oil．

C．Clean the outer surface of the machine with an oil

moistened cloth．Cover the unit and store in a

humidity-free．dust-free area．

CARE AND PREVENTIVE MAINTENANCE

Check the oil level in the motor crankcase daily．

Check the vibrator oil level weekly．

Inspect the rubber anti vibration mounts for wear or deteriora-

tion．

Clean the underside of the plate regularly to prevent a build

of material．

SERVICE

Change the oil in the motor crankcase regularly to minimise

Wear．

Inspect, clean and/or replace the motor air cleaner regularly,

particularly when operating in a dusty environment．

Inspect，clean and/or replace the spark plug regularly

Check all fasteners for tightness as the machine is subject to

vibration．

Check vee belt tension，wear and that it is running true, adjust

or replace as required．

Vibrator Oil Check

1．Place the plate compactor horizontally on a

flat surface．Make sure the compactor is level when checking

the oil in the vibrator assembly．

2．Check vibrator oil level by removing the plug(vibrator oil

gauge)as shown in Fig-1 7．

The oil leveI should be up to the oil plug．If oil is required,

replace using SAE motor oil, as suggested in the table Fig-1．

3 ． When changing the vibrator oil, remove the drain

plug(Fig-17), and simply tip the compactor to drain the

oil．Note that the oil will drain more easily while it is hot．

Fig-17 Vibrator Oil Piug