Manualshelf

Use and Care Manual

ManualsBrandsStark ManualsBuilding materials6.5 HP 196 cc 4-Stroke Concrete Surface Finishing Walk-Behind Power Trowel Machine with 36 in. Trowel Blade
12345678910
OPERATION
5
6. With one hand on the buttress handle, draw the engine handle
with the other.
←
7. Warm up the engine for three to ve minutes rst, then open the
block wind door.
8. Adjust the blades to the proper height.
9. With both hands hold the handle, then adjust the switch of the
Oil Door to the proper running sped for operation.
10. To turn off, put the switch of the Oil Door to “L”. Put the Safe
Switch to “Close”, then put the blades to level position.