Replacement Part List

9
1. Switch off the power and unplug the log splitter.
2. Always check the hydraulic oil leve before operation. Operating the log splitter without adequate hydraulic
oil can cause damage to the log splitter.
3. Wipe the unit after each use with an oil rag to prevent rust.
4. The hydraulic system is preset at the factory. Do not adjust the valve.
5. If the ram moves slowly or erractically, there may be air in the system or insufcient oil. Check the level
of hydraulic oil with the dipstick.
6. For other hydraulic and motor problems not addressed in this manual, contact a qualied technician.
7. If the wedge is dull or nicked, sharpen it. Always wear safety glove while handling the wedge
8. All replacements parts must meet the manufacturers specications.
Note: If the motor is overloaded for a long time, the thermal protector will disconnect the power of the the
motor. Switch off and unplug the power cord to cool down the motor for 30 minutes. Restart the motor and
the log splitter should operate again.
Note: Switch off and unplug the power cable quickly if the machine is acting abnormal.
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING