Replacement Part List
6
5. Raise the motor end of the splitter and make sure it is secure.
6. Pour approximately 3.2 liters of hydraulic uid into the tank.
7. Check the uid level of the dipstick, add more uid of needed.
8. Replace the uid drain bolt and tighten securely.
9. Lower the log splitter.
Allow the log splitter to cool down for ve minutes before storing.
Switch off and unplug the log splitter before storing.
Protect the power supply cable from heat, sunlight, agressive liquids and sharp edges.
Store the unit in a clean, dry area. Do not store outdoors or next to corrosive materials or in a damp
environment.
Store the log splitter out of reach of children.
STORING THE LOG SPLITTER
TROUBLESHOOTING
ASSEMBLY