Operations Manual
Adjustment | 31 30 | Adjustment
To access the native iOS hearing aid controls, triple-
click the Home button (On the iPhone 8 or earlier
versions� Please consult Apple support for iPhone X or
newer options�) on your iOS device� From this screen
you can adjust the volume, select memory or use your
iOS device as a remote microphone�
Select Start Live Listen to stream the iOS device
microphone input directly into your hearing aid� Point
the iOS device microphone toward the audio source�
To minimize background noise and provide the best
signal, place the iOS device as close to the source
as possible�
Right Volume/Left Volume allows you to increase
and decrease volume for each hearing aid individually�
Turn off Adjust Independently to make changes to
both hearing aids simultaneously�
Normal indicates the name of a memory setting in
the
hearing aid� You can select from any memories
shown in
the list to change the hearing aid to that
memory setting�
Pairing Your Hearing Aid with an iOS Device
To adjust your hearing aid with your iOS device,
you must pair the two together so they can
communicate� Please follow the instructions
to pair your iOS device and your hearing aid�
1� Ensure Bluetooth
®
is enabled on your iOS
device� Within the Settings menu go to
Bluetooth and toggle to On�
2� Locate, then tap the Settings icon on your
iOS device�
3� Within the Settings menu go to General >
Accessibility > MFi Hearing Devices�
4� While the iOS device searches for the hearing
aids, open and close the battery door on your
hearing aids� This puts the hearing aids in
pairing mode�
• You will see your hearing aid name (e�g� “Chris
Hearing Aids”) when the iOS device first
discovers your hearing aids�
• If your name does not appear in the “Devices”
list within 5-7 seconds, tap Accessibility in the
upper left corner, then tap MFi Hearing Devices�
You are now ready to use your iOS device to adjust
your hearing aid� You can adjust either with the native
iOS controls or with Thrive Hearing Control�