Operations Manual

Operation | 17 16 | Operation
Memory Change
Your hearing professional may create multiple
memories within your hearing aid� These additional
memories can be accessed by activating the user
control on your hearing aid�
If your user control is configured for memory
changes, each time you activate the user control, the
memory of your hearing aid will increment through
the available memories�
Memory Indicators
Your hearing professional may enable an audible
indicator, which is presented while making a memory
change� The indicator defaults to a voice identifying
which memory your hearing aid is in�
Mute
If your hearing aid is configured with mute
functionality, a long press and hold of the user
control will mute your hearing aid� If enabled by
your hearing professional, you may hear an indicator
prior to the hearing aid muting� To unmute your
hearing aid, press the button again and audio will
be restored�
Volume Control Indicators
Your hearing professional may enable audible
indicators, which highlight the current volume position�
Battery Indicators
An indicator will sound when the battery voltage is
low� You have approximately 30 minutes* of battery
life remaining� An indicator may also sound just before
the battery stops working�
*Actual time between low battery indicator and shut down will vary depending
on enviornmental noise levels and your use of the product.

Volume Level
Tone
Volume Max 5 Beeps •••••
Volume Step(s)
Short Tone –
Volume Home (Power on volume level)
3 Beeps •••
Volume Step(s)
Short Tone –
Volume Min Single Beep •
My hearing aid is configured with the following
control:
Press and Release Volume Control
Press and Hold Volume Control