Owners manual

Instruction manual
6
Attach the cable organizer
After you remove the mounting buttons, complete the following to attach the cable
organizer to your server rack:
1. Line up the mounting holes on the cable organizer with the mounting holes on any
of the following on your server rack:
• The vertical mounting plates.
• The horizontal mounting rails.
• The equipment-mounting holes.
Note: To view images of some of the dierent installation options mentioned above,
see the “Installation options” section.
2. Insert two of the M5 cage nuts into the server rack where you want to attach the
cable organizer.
3. Insert two M5 cage screws through the cable organizer and into the cage nuts in
the server rack.
Installation options
The following images show some of the CMVER20UF installation options.
Attached to a vertical mounting plate