User's Manual

Instruction Manual
12
When Auto Scan detects any keyboard or mouse activity, it suspends the scanning
until the activity stops. It then resumes with the next computer in sequence. The
length of the Auto Scan interval (Scan Rate) is adjustable. To abort Auto Scan mode,
press the left <CTRL> key twice.
NOTE: Scan Type determines whether an eye-marked computer is to be displayed during
Auto Scan.
Manual Scan
This mode enables you to manually switch back and forth between the powered
computers:
Left <CTRL>, Left <CTRL>, <F2>
Press the <UP> arrow key to select the previous computer and the <DOWN> arrow
key to select the next computer. Press any other key to abort Manual Scan mode.
NOTE: Scan Type determines whether an eye-marked computer is to be displayed during
Auto Scan.
Scan Rate
To adjust Scan Rate, which sets the duration before switching to the next computer
in Auto Scan:
Left <CTRL>, Left <CTRL>, <F3>
The switch will beep one to four times indicating the scan interval of 3, 8, 15 and 30
seconds respectively.
To adjust keyboard typematic rate (characters/sec) for PS/2 keyboards:
Left <CTRL>, Left <CTRL>, <F4>
The KVM switch beeps 1 to 4 times corresponding to 10, 15, 20 and 30 characters/sec
respectively.
Sun/Mac Keyboard Mapping
The KVM Switch emulates a Sun Keyboard when a computer is marked with
a Sun, in the OSD menu by Function Key <F5>. A Sun keyboard has more keys
than a standard PC keyboard. These extra keys are simulated by tapping the Right
<CTRL> button, which is normally located on the right lower part of the keyboard,
followed by one of the function keys on the general keyboard (i.e. combo key). For
example, tap the Right <CTRL> key, and then tap the function key <F7> to activate
Open for a Sun computer.
NOTE: For older Sun Operating Systems, the switch does not support the Low Power
option under Power O Select.
For keystroke emulation of Sun/Mac computers, please refer to the above chart and
conduct the following two examples:
“Stop A” function in Sun: Press right <CTRL> and release, then within two seconds
press <F1> and <A> in sequence.
“Help” function in Sun: Press right <CTRL> and release, then within 2 seconds, press <H>.