User's Manual
Instruction Manual
5
The maximum number of computers controlled by a Master/Slave conguration with
all 8-port units is 64, with 8 Slaves and each Slave connecting to 8 computers:
The maximum number of computers controlled in a Master/Slave conguration with
all 16-port units is 136, with 8 units of 16-port Slaves (to PC 1 - PC 8) and each Slave
connected to 16 computers, plus 8 more computers connected directly to the Master
(to ports PC A - PC H):
After the connection has been completed, please re-activate the OSD menu to verify that
the Master recognizes the Slaves. A triangle mark (
►
) is placed next to the right of the
channel name indicating that the port is connected to a Slave, not a computer. A number
to the left of the triangle mark indicates the Slave model, i.e. ‘8’ for an 8-port switch.
NOTE: A device (computer or KVM switch) at any ‘PC x’ port can be changed at any
time after initial power-up. If you change any one of the PC 1 to PC 8 port connections
from a computer to a Slave KVM switch or vice versa, or replace the devices of a port,
the OSD will update this change the next time it is activated.