USB 3.0 to 2.5” SATA III Enclosure w/Encryption S2510BU33PW *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Product Diagram.......................................................................
Introduction Packaging Contents • 1 x USB 3.0 to 2.5” SATA III Enclosure w/ Encryption • 1 x USB 3.0 Cable • 1 x Drive case • 1 x Drive installation screws • 1 x Mini screw driver • 1 x Instruction manual Note: It is recommended that the contents of this enclosure be regularly backed-up, as lost passwords or hardware failure (SATA drive or enclosure) will result in the stored data being unrecoverable. System Requirements • Computer system with available USB port • 2.
Product Diagram Top View 1. OLED Readout Display 2. Touchscreen Keypad 1 2 Front View 1. USB 3.
Hardware Installation WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds.
3. Place the 2.5” SATA drive into the bay (label side down) and slide the drive onto the SATA connector. Make sure the drive is fully seated. CAUTION: To use AES encryption, the drive must be initialized and formatted after setup. Do not place a drive containing data you wish to encrypt into the enclosure. The data must be copied over after the enclosure has been setup. 4. Place the back panel back onto the enclosure and fasten using the small screws. 5.
How to Use Initial Setup 1. When connected to a host computer for the first time, the OLED readout will prompt you to setup a password or not. If no password is used, the enclosure will function as a standard external hard drive enclosure without any encryption. The new HDD is connected. Will you use Passwords? Yes/No 2. If you have chosen to use a password you will receive a prompt informing you it will be impossible to recover data without your password. Select “Yes” to continue.
5. Once the password has been setup, the SATA drive must be initialized and formatted before use. From the main Windows desktop, right-click on “My Computer” (“Computer” in Vista/ 7 / 8), then select Manage. In the new Computer Management window, select Disk Management from the left window panel. 6. A dialog window should automatically appear, asking your to initialize the drive. Depending on the version of Windows, it will give you the option of either creating an “MBR” or “GPT” disk.
Menu Options Pressing the
1. Name ( ) 2. Phone Number ( ) 3. User Info display When entering characters for the “Name”, refer to the following chart. Enter the code for the desired character and then press . When finished entering all characters, press the
Do you want to initialize HDD? 0=NO, 1=YES HDD Lock Instead of disconnection the hard drive during extended period no use or while leaving the drive unattended the drive can be Locked and disconnected from the host by pressing and holding the
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.